What is the difference between crossed roller bearings and ball bearings?

Crossed roller bearings and ball bearings are both types of anti-friction bearings, but there are some key differences between them:

Construction

Ball bearings consist of a series of small metal balls held in place by a cage, while crossed roller bearings have cylindrical rollers that are crossed at a 90-degree angle and alternately arranged between inner and outer rings. The crossed roller bearings have a more complex design than ball bearings, and they tend to be more rigid and precise.

Crossed roller bearings

Load capacity

Crossed roller bearings are designed to handle higher loads and higher rotational speeds than ball bearings. The crossed roller bearing’s crossed arrangement of rollers distributes loads evenly and reduces the risk of roller slippage. Ball bearings, on the other hand, are typically used for lighter loads and lower rotational speeds.

Accuracy

Crossed roller bearings offer a higher level of accuracy than ball bearings. The crossed rollers are preloaded to maintain a certain level of accuracy and reduce the effects of clearance or deflection. Ball bearings have more clearance between the balls and the raceway, which can cause some degree of play and reduced accuracy.

For more detailed information about the difference between crossed roller bearings and ball bearings, please click to visit:https://www.prsbearings.com/a/news/the-difference-between-cross-roller-bearings-and-ball-bearings.html