Metal Briquetting Machine Maintenance & Troubleshooting: Maximize Efficiency and Lifespan

Metal briquetting machines are indispensable pieces of equipment in industrial production, widely used in metal recycling, waste compression, and material reuse. To ensure efficient operation, extend service life, and minimize downtime, scientific maintenance and rapid troubleshooting are crucial. This guide provides comprehensive metal briquetting machine maintenance tips, solutions to common problems, and safe operation recommendations to help businesses improve production efficiency and reduce operating costs.

Metal Briquetting Machine Maintenance & Troubleshooting

I. Regular Maintenance Checklist for Metal Briquetting Machines

Regular maintenance is key to maintaining the long-term stable operation of the equipment. We recommend performing the following checks according to a set time interval:

Daily Check:

Confirm that the hydraulic oil level is normal and the oil is clean and free of contamination.

Listen to the machine’s operating sound; if any abnormal noise is detected, stop the machine immediately and inspect it.

Check that the operating buttons and safety devices are functioning properly.

Weekly Check:

Clean the area around the equipment to prevent dust or debris from interfering with operation.

Check for leaks in the hydraulic lines and tighten any loose parts.

Inspect the pressure plate, cylinder, and punch for wear or damage.

Monthly Check:

Replace the hydraulic oil filter element and keep the hydraulic system clean.

Inspect the electrical system, including the control cabinet, terminals, and grounding wire.

Lubricate critical components to ensure smooth operation.

Regular maintenance not only improves production efficiency but also significantly reduces the failure rate, ensuring safe equipment operation.

II. Common Problems and Quick Solutions

In daily operation, metal briquetting machines may experience some common malfunctions. The following are practical solutions:

Problem 1: Insufficient Hydraulic Pressure

Possible Causes: Insufficient hydraulic oil, oil circuit blockage, or hydraulic pump malfunction.

Solution: Add hydraulic oil, replace the oil filter, or repair the hydraulic pump.

Problem 2: Difficulty Starting the Machine or Inability to Briquet

Possible Causes: Electrical fault, poor switch contact, or safety interlock not disengaged.

Solution: Check the power supply, switches, and electrical wiring to ensure the safety interlock is working properly.

…

For more detailed information on metal briquetting machine maintenance and troubleshooting, please click to visit: https://www.zymining.com/en/a/news/maintenance-and-troubleshooting-guide-for-metal-briquetting-machines.html